• Send Us a Message
    • Skip to content

    Best Selling Products

    Filters

    Conveyor Components Product Guides & Brackets Stainless Steel Clip Self Tightening 1/4"-20 Thread Male Thread 5/8" Stud Length

    VG-014H-01 Self Tightening Clip, Stainless Steel,~5/8" Stud (20ea Per Pack)

    SKU: VG-014H-01
    System Plast
    $50.50 - $50.50
    $50.50
    $50.50 - $50.50
    $50.50

    Features Medium duty, self tightening clip, for supporting guide rail. Jaws of clip open for easy attachment then clamp onto rail when tightened. ...

    View full details
    $50.50 - $50.50
    $50.50
    $50.50 - $50.50
    $50.50
    Conveyor Components Product Guides & Brackets Stainless Steel Splice Sleeve 6" Long

    VG-013-06 Splice Sleeve, Stainless Steel, 6" (10ea Per Pack)

    SKU: VG-013-06
    System Plast
    $68.63 - $68.63
    $68.63
    $68.63 - $68.63
    $68.63

    Features Single splice sleeve used to connect two ends of guide rail. This tight fitting sleeve can be tapped on with a hammer, no screws or bolts...

    View full details
    $68.63 - $68.63
    $68.63
    $68.63 - $68.63
    $68.63
    Conveyor Components Product Guides & Brackets Stainless Steel Clamp For 5/16" Screws For M8 Screws Single Rail Clamp 3" Long

    VG-012-03-SH-316 Single Rail Clamp, 316 Stainless Steel,~Square Hole (6ea Per Pack)

    SKU: VG-012-03-SH-316
    System Plast
    $94.43 - $94.43
    $94.43
    $94.43 - $94.43
    $94.43

    Features Single guide rail clamp with square hole. 3 inches wide, used for splicing rail together. 316 stainless steel, 14 gauge. Links Catalog Page

    $94.43 - $94.43
    $94.43
    $94.43 - $94.43
    $94.43
    Conveyor Components Product Guides & Brackets Stainless Steel Clamp For 5/16" Screws For M8 Screws Single Rail Clamp 1" Long

    VG-012-01-316 SINGLE RAIL CLAMP, 316 STAINLESS STEEL FOR 5/16" OR M8 FASTENER (20ea Per Pack)

    SKU: VG-012-01-316
    System Plast
    $79.50 - $79.50
    $79.50
    $79.50 - $79.50
    $79.50

    Features Single guide rail clamp with round hole. 316 stainless steel, 14 gauge. Links Catalog Page

    $79.50 - $79.50
    $79.50
    $79.50 - $79.50
    $79.50
    Conveyor Components Wear Strips UHMW White Round Bar Cover 7/8" Wide 7/8" High 96" Long

    VF-CRP5-8FT Round Bar Cover: 0.84"W X 0.84"H X 96"L White UHMW-PE

    SKU: VF-CRP5-8FT
    System Plast
    $20.73 - $20.73
    $20.73
    $20.73 - $20.73
    $20.73

    Features Ram extruded UHMW-PE. Ultra high molecular weight material can be used in a variety of applications. Low friction characteristics of UHMW...

    View full details
    $20.73 - $20.73
    $20.73
    $20.73 - $20.73
    $20.73
    Conveyor Components Hardware Acetal Clamp 1/4" Thick

    SF-PC2-14 Panel Clamp, Acetal, 1/4", Black

    SKU: SF-PC2-14
    System Plast
    $8.00 - $8.00
    $8.00
    $8.00 - $8.00
    $8.00

    Links Catalog Page

    $8.00 - $8.00
    $8.00
    $8.00 - $8.00
    $8.00
    Conveyor Components Frame & Structure Supports Polyamide Corner Joint 2-Way

    SF-C2PR-BK Corner Joint, 2-Way, Plastic, Steel Reinforced

    SKU: SF-C2PR-BK
    System Plast
    $15.50 - $15.50
    $15.50
    $15.50 - $15.50
    $15.50

    Links Catalog Page

    $15.50 - $15.50
    $15.50
    $15.50 - $15.50
    $15.50
    Conveyor Components Product Guides & Brackets Polyamide Ratchet Handle 5/16"-18 Thread 2-3/16" Handle Male Thread 1-1/2" Stud Length

    RH-20-BK-MS51618-40 Ratchet Handle (Male); Thread: 5/16-18, Handle Length: 2.16-in Stud Length: 1.57-in, Color: Black (4ea Per Pack)

    SKU: RH-20-BK-MS51618-40
    System Plast
    $95.50 - $95.50
    $95.50
    $95.50 - $95.50
    $95.50

    Features Male ratchet handles. For use in areas where frequent adjusting is required, where handle movement is restricted, or where adjustability ...

    View full details
    $95.50 - $95.50
    $95.50
    $95.50 - $95.50
    $95.50
    Bearings Roll End Bearings Acetal Blind Bore 2" Tube Sch 40 Wall 1/2" Bore

    NRB-270/8B Acetal End Bearing, Blind Bore,~for 1/2" Shaft and 2.09~ID Tube (2ea Per Pack)

    SKU: NRB-270/8B
    System Plast
    $8.00 - $8.00
    $8.00
    $8.00 - $8.00
    $8.00

    $8.00 - $8.00
    $8.00
    $8.00 - $8.00
    $8.00
    Bearings Roll End Bearings Acetal Through Bore 2" Tube Sch 40 Wall 1/2" Bore

    NRB-270/8 Acetal End Bearing for 1/2" Shaft,~and 2.09 ID Tube (2ea Per Pack)

    SKU: NRB-270/8
    System Plast
    $7.23 - $7.23
    $7.23
    $7.23 - $7.23
    $7.23

    $7.23 - $7.23
    $7.23
    $7.23 - $7.23
    $7.23
    Bearings Roll End Bearings Acetal Through Bore 1-1/2" Tube Sch 40 Wall 1/2" Bore

    NRB-220/8 Acetal End Bearing for 1/2" Shaft,~and 1.62 ID Tube (2ea Per Pack)

    SKU: NRB-220/8
    System Plast
    $6.38 - $6.38
    $6.38
    $6.38 - $6.38
    $6.38

    $6.38 - $6.38
    $6.38
    $6.38 - $6.38
    $6.38
    Conveyor Components Wear Strips UHMW White Rectangular 1/4" Thick 1-1/4" Wide 10ft Long

    HS-0420-10 Rectangular Wear Strip: 0.25"W X 1.25"H X 120"L White UHMW-PE (10ft Per Pack)

    SKU: HS-0420-10
    System Plast
    $29.63 - $29.63
    $29.63
    $29.63 - $29.63
    $29.63

    Features Ultra high molecular weight material can be used in a variety of applications. Low friction characteristics of UHMW allow chains/belts an...

    View full details
    $29.63 - $29.63
    $29.63
    $29.63 - $29.63
    $29.63
    Conveyor Components Wear Strips UHMW White Chain Guide 1-1/2" Wide 1/2" Thick 10ft Long W-Shaped 60 Pitch

    HG-2060-10 Chain Guide: 1.5"W X 0.5"H X 120"L White UHMW-PE (10ft Per Pack)

    SKU: HG-2060-10
    System Plast
    $79.00 - $79.00
    $79.00
    $79.00 - $79.00
    $79.00

    Features Roller Chain Guide Tracks Standard plastic tracks are primarily used to guide and support ANSI double pitch chain in packaging and drag c...

    View full details
    $79.00 - $79.00
    $79.00
    $79.00 - $79.00
    $79.00
    Conveyor Components Rollers Stainless Steel Roller Stub Shaft 1/2" OD 7/16" Hex OD 1-1/2" Long 5/16"-18 Thread

    CRP-0824SS Roller Stub Shaft; OD: 0.5-in, Shaft Dia: 0.44-in Hex, Length: 1.5-in, Color: Stainless Steel (20ea Per Pack)

    SKU: CRP-0824SS
    System Plast
    $68.00 - $68.00
    $68.00
    $68.00 - $68.00
    $68.00

    Features Stainless steel roller stub shafts for use in blind hole bearings. A 7/16 inch hex section is provided on the outside portion so that an ...

    View full details
    $68.00 - $68.00
    $68.00
    $68.00 - $68.00
    $68.00
    Belts Plastic Modular Belts Straight Running NG Evo Grey Blue Flat Top 1/2" Pitch 6" Wide 2121 Series

    NGE2121FT-K600 2121 Series Straight-Running Modular Plastic Belt - Material: NGE, Surface: Flat Top, Width: 6-in, Pitch:0.5-in (10ft Per Pack)

    SKU: AA2501633
    System Plast
    $287.25 - $287.25
    $287.25
    $287.25 - $287.25
    $287.25

    Features NG Evo (gray blue in color) conveyor components made from engineered plastic resin. Longest Life Lowest friction. Good chemical resistanc...

    View full details
    $287.25 - $287.25
    $287.25
    $287.25 - $287.25
    $287.25
    Belts Chain Side Flexing NG Evo Grey Blue Rubber Top Tabs 1-1/2" Pitch 3-1/4" Wide 879 Series

    NGE879TAB-K325VG 879 Series Side-Flexing Chain - Material: NGE, Surface: Friction-top, Curve Retention: Tab, Width: 3.25-in, Pitch: 1.5-in

    SKU: AA1100386
    System Plast
    $53.65 - $53.65
    $53.65
    $53.65 - $53.65
    $53.65

    Features NG Evo (gray blue in color) conveyor components made from engineered plastic resin. Longest Life Lowest friction. Good chemical resistanc...

    View full details
    $53.65 - $53.65
    $53.65
    $53.65 - $53.65
    $53.65
    Belts Chain Side Flexing NG Evo Grey Blue Flat Top Magnetic 1-1/2" Pitch 4-1/2" Wide 880 Series

    NGE880M-K450 880 Series Side-Flexing Chain - Material: NGE, Surface: Flat Top, Curve Retention: Magnetic, Width: 4.5-in, Pitch: 1.5-in (10ft/pack)

    SKU: AA1100307
    System Plast
    $492.90 - $492.90
    $492.90
    $492.90 - $492.90
    $492.90

    Features NG Evo (gray blue in color) conveyor components made from engineered plastic resin. Longest Life Lowest friction. Good chemical resistanc...

    View full details
    $492.90 - $492.90
    $492.90
    $492.90 - $492.90
    $492.90
    Belts Chain Side Flexing NG Evo Grey Blue Snap-on Rubber Gripper Tabs 1-1/2" Pitch 3-1/4" Wide 1873 Series

    NGE1873TAB-K325GS1 1873 Series Side-Flexing Chain - Material: NGE, Surface: Gripper, Curve Retention: Tab, Width: 3.25-in, Pitch: 1.5-in (10ft Per Pack)

    SKU: AA1100287
    System Plast
    $1,337.00 - $1,337.00
    $1,337.00
    $1,337.00 - $1,337.00
    $1,337.00

    Features NG Evo (gray blue in color) conveyor components made from engineered plastic resin. Longest Life Lowest friction. Good chemical resistanc...

    View full details
    $1,337.00 - $1,337.00
    $1,337.00
    $1,337.00 - $1,337.00
    $1,337.00
    Belts Chain Side Flexing NG Evo Grey Blue Flat Top Bevel 1-1/2" Pitch 4-1/2" Wide 880 Series

    NGE880-K450 880 Series Side-Flexing Chain - Material: NGE, Surface: Flat Top, Curve Retention: Bevel, Width: 4.5-in, Pitch: 1.5-in (10ft Per Pack)

    SKU: AA1100272
    System Plast
    $354.50 - $354.50
    $354.50
    $354.50 - $354.50
    $354.50

    Features NG Evo (gray blue in color) conveyor components made from engineered plastic resin. Longest Life Lowest friction. Good chemical resistanc...

    View full details
    $354.50 - $354.50
    $354.50
    $354.50 - $354.50
    $354.50
    Belts Chain Straight running NG Evo Grey Blue Flat Top 1-1/2" Pitch 6" Wide 820 Series

    NGE820-K600 820 Series Straight-Running Chain - Material: NGE, Surface: Flat Top, Curve Retention: None, Width: 6-in, Pitch: 1.5-in (10ft Per Pack)

    SKU: AA1100235
    System Plast
    $240.13 - $240.13
    $240.13
    $240.13 - $240.13
    $240.13

    Features NG Evo (gray blue in color) conveyor components made from engineered plastic resin. Longest Life Lowest friction. Good chemical resistanc...

    View full details
    $240.13 - $240.13
    $240.13
    $240.13 - $240.13
    $240.13
    Belts Chain Straight running Low Friction Acetal Brown Flat Top 1-1/2" Pitch 7-1/2" Wide 820 Series

    LF820-K750 820 Series Straight-Running Chain - Material: LF, Surface: Flat Top, Curve Retention: None, Width: 7.5-in, Pitch: 1.5-in (10ft Per Pack)

    SKU: AA1100142
    System Plast
    $209.63 - $209.63
    $209.63
    $209.63 - $209.63
    $209.63

    Features LF (brown in color) acetal material is commonly used in the market and offers an improved coefficient of friction and is suitable for use...

    View full details
    $209.63 - $209.63
    $209.63
    $209.63 - $209.63
    $209.63
    Conveyor Components Product Guides & Brackets Stainless Steel Eyebolt

    VG-EB-12-30 Eyebolt, 12mm dia., SS, M10 x 30MM.

    SKU: 83053S
    System Plast
    $4.79 - $4.79
    $4.79
    $4.79 - $4.79
    $4.79

    Links Catalog Page

    $4.79 - $4.79
    $4.79
    $4.79 - $4.79
    $4.79

    LFG2121FT-PT-K200 2121 Series Straight-Running Modular Plastic Belt - Material: LFG, Surface: Flat Top w/ Positioning Tabs, Width: 2.0-in, Pitch:0.5-in (10ft Per Pack)

    SKU: 25054H
    System Plast
    $168.25 - $168.25
    $168.25
    $168.25 - $168.25
    $168.25

    Features LFG (gray in color) low friction acetal material. Links Catalog Page

    $168.25 - $168.25
    $168.25
    $168.25 - $168.25
    $168.25
    Conveyor Components Modular Transfer Plates Acetal Frame Acetal Rollers End Transfer Module 9" Wide With 4 Rollers M8 Thread

    TME-K900R4SSA-FM End Transfer Module; Width: 8.9-in, Length: 3.11-in, Height: 0.87-in, w/ 4 Type SSA rollers

    SKU: 16S00025-SSA
    System Plast
    $151.33 - $151.33
    $151.33
    $151.33 - $151.33
    $151.33

    Features Easy and flexible mounting Smooth transition between conveyors Use individually or back-to-back Heavy duty robust construction Mounting h...

    View full details
    $151.33 - $151.33
    $151.33
    $151.33 - $151.33
    $151.33